Lek Logotype: Logotype - Endorsement
The Logotype is the most important element of visual communication. Lek’s logotype shall always be used with the endorsement, only exceptionally without it (minimum and maximum size e.g. on pens, buildings).
These elements cannot be separated. The original logotype must be used, which means that it may not be redrawn, scanned or modified. Files containing the logotype with endorsement can be found on the internet (www.lek.si).
The colours which may be used for the Lek logotype are also prescribed. We can use Lek blue (Pantone 541), black (only in black on white print) or in negative – white on a dark background. When referring to Lek in text, it shall always be written in lower case with an initial capital.
Minimum empty space around logotype with endorsement.
Lek logotype with endorsment: configuration
Primary position
Secondary position
Lek logotype with endorsment: configuration
Primary position
Secondary position
Increasing and reduction of Lek logotype with endorsement
The logotype and endorsement shall always be increased or reduced proportionally.
| increase as necessary |
Recommended logotype size:
- A0 (841 × 1189) 100 mm
- A1 (594 × 841) 70 mm
- A2 (420 × 594) 50 mm
- A3 (297 × 420) 35 mm
- A4 (210 × 297) 25 mm
- A5 (148 × 210) 20 mm
- A6 (105 × 148) 18 mm
In exceptional cases, when there is really not enough space, the logotype with endorsement can be used in size 10 mm, e.g. on pens.
